Item 1 of 9

Trepanel Aqua® Waterproof Smoked Oak Brown Wood Effect Slat Panels 3 Pack (Covers 1.39 SQM)

14 reviews 14 reviews

Size: 2400x200x12mmID: 802325More Stock due 14/03/25

Please note: This product is sold in full packs of 1.39m² per box.

Colour: Smoked Oak

Panel Size: 2400x200mm

Felt Colour

£ 44.95 / sqm£ 62.48 per pack.

SQM (QTY)

Pack

How many do I need?

View In Your Home

View In Your Home

Key Features

> Sold as boxes of 3 panels (Covers 1.39m)

> Realistic natural wood effect print across slat-style surface

> Rigid, PS build with 90% recycled polystyrene and 10% virgin materials

> Long-lasting waterproof design (please see the Trepanel Aqua® guide)

> Suitable for interior walls requiring a waterproof solution

> Easy to clean and maintain (check out cleaning and maintenance below)

> Warming, smoked oak wood colouring

> Easy one-person installation

> Arrives to you as one solid component

>Note: Our Trepanel Aqua® joints cannot be used with these panels

Description

Cleaning and Maintenance

How to Install Wood Panels

Weight5.25 KG

Product ID802325

Material TypePolystyrene Composite

Product colorBrown

FinishMatt

Size2400x200x12mm

Thickness(mm)12

Tiles Per SQM0.72

Panel Coverage(sqm)0.48

Slat Size WxD(mm)35x8

Slats Per Panel4

Gaps Between Slats(mm)13

Panel SuitabilityWalls & Ceilings

Area Of UsageInterior

Panels Per Pack3 Panels

Pack Coverage1.39 Sqm

Product Details

How to Install Wood Panels

Q & A

Yves01/02/25

I have the same question as Susanne Howes (which I don’t think was answered properly). As this product is not a straight edge how can it be neatly siliconed to the edge of a bath or shower? Have it received a sample this looks like it may be impossible to achieve a neat finish?Our Advice

Hi Yves, Due to the ridges and recesses present on these panels, it is essential that you, or the person installing them, apply silicone sealant both within and around the "slats." For a smooth and polished finish, it is recommended to use a silicone finishing tool. I trust this information will be helpful. Should you require any further assistance, please do not hesitate to contact us. Kind Regards, Walls and Floors.

Janice28/01/25

Can the panels be installed onto existing wall tiles?Our Advice

Hi Janice, Yes, these can be installed onto existing tiles. We would recommend to: Clean the Surface: Ensure the tiles are clean and free of any grease, dirt, or debris. This helps the adhesive bond properly. And to check for Flatness: Verify that the tile surface is even. If there are any uneven areas or damaged tiles, they should be repaired or levelled before installation. Kind regards, Walls and Floors

Dan26/01/25

The total length of our bathroom is just under 4m, and the height 2.4m, as there are 3 panels to a pack totaling 0.6m in length, am I correct to calculating that I need 7 packs, please? Thank you.Our Advice

Hi Dan, For this area, you shall need 7 packs. For further help, please feel free to reach out. Kind Regards, Walls and Floors.

Elbeth22/01/25

Can the panels be fixed with adhesive instead?Our Advice

Hi Elbeth, Yes, these can be installed using adhesive. We would recommend Mapei Super Grip Panel Adhesive: https://www.wallsandfloors.co.uk/mapei-ultra-super-grip-adhesive Please also see our installation guide linked below: https://m2.wallsandfloors.co.uk/media/amasty/amfile/attach/Trepanel-Aqua-Guide_2_.pdf Kind regards, Walls and Floors

Jez Rhodes 19/01/25

I am panelling a decorative wall in the bathroom: the wall is 2300 height so I will have to cut off each piece, do the panels cut ok without splintering or leaving visible chips Thanks, Jez Our Advice

Hi Jez, The Trepanel Aqua® Waterproof Smoked Oak Brown Wood Effect Slat Panels will be cut evenly, we do advise the panels to be cut with a fine tooth saw. Kind regards, Walls and Floors.

Sophie21/10/24

Can you have these on the same wall as a towel rail in a bathroom? Our Advice

Hi Sophie, Thanks for your query. Unfortunately not- The panels cannot be exposed to any heat from radiators. Kind Regards, Walls and Floors.

Susanne Howes24/09/24

Please can i ask how you seal the bottom of these slatted panels to the shower tray? Thanks Our Advice

Hi Susanne, Thanks for your query. We recommend using a silicone sealant to seal off the bottoms of the panels. Kind Regards, Walls and Floors.