Trepanel® Walnut Brown Wide Slat Acoustic Wood Wall Panels
Colour: Walnut
Panel Size: 2400x600mm
How many do I need?
Key Features
Key Features
> Uniquely wrapped, on all 3 sides with Real Wood Veneer
> Luxurious wide slat format
> Strong felt backing with sound absorbing possibilities (see Trepanel® Guide for more info)
> Suitable for interior walls & ceilings
> Easy maintenance, no need to oil (check out cleaning & maintenance below)
> Warm, dark brown walnut shade
> Easy one-person installation
Description
Description
Trepanel® Walnut Wide is the ideal affordable choice for creating that sought-after wood slat style in your own home. Our panels have a strong felt backing with excellent sound-absorbing qualities, perfect for helping reduce echoes in larger rooms when installed following the Trepanel® Guide. Trepanel® Wide is constructed with a wider MDF core, which is so lightweight and easy to cut it can be installed by one person (although you may prefer a team of two for fixing), it’s fast to put up and creates minimal mess so you can transform a space in minutes! The fully veneered slats themselves have the texture, colour variation and grain of real wood in a warm, dark brown walnut shade, visible from all angles.
Fixing Guide
To fix Trepanel® we recommend using either black matt coated 38mm screws or Mapei Super Grip Panel Adhesive. One panel requires 15 screws or one tube of adhesive.
The wood veneer is a natural material, and each piece of veneer is unique in terms of wood's natural characteristics, that being texture, colour variation and grain, it also may undergo changes over time when exposed to light.
Please note: We do not recommend for use in areas close to a heat source, e.g. a hob or fireplace, or where they will come into direct contact with water.
Cleaning and Maintenance
Cleaning and Maintenance
We recommend regular cleaning with a duster or soft brush, to gently remove dust and debris, avoid harsh brushes and scratchy materials.
Do NOT use any type of wood or furniture polish as it can damage the veneer. Our panels are fully finished so no need for additional maintenance of oiling.
Periodic use of vacuums with a soft attachment can easily remove dust from the felt back.
For more stubborn stains use a damp cloth (not wet). If spills occur use a clean, absorbent cloth to dry immediately.
Avoid excess moisture with Trepanel® as the felt back should not come into contact with liquids.
How to Install Wood Panels
Product Details
Product Details
Finish The Look:
You may also like:
Product Reviews
Product Reviews
Product Reviews
How to Install Wood Panels
Q & A
Hi David, The wood panels are not fire-rated. Kind Regards Walls and Floors
Hi John, Our panels are very easy to cut yourself. For the slats, we recommend a regular hand saw and for the felt, a sharp stanley knife. Please find our 'How to Install Wood Slat Wall Panels' video and Trepanel Guide linked below: https://www.youtube.com/watch?v=oVsyofQ3Vw4 https://m2.wallsandfloors.co.uk/media/amasty/amfile/attach/DesignDataSheet_Updated_3_.pdf We would not however, recommend installing our panels near a heat-source as this may interfere with the veneer and adhesive used. Kind regards, Walls and Floors
Hi Kyle, We would not recommend installing panels in areas with high levels of moisture or where they may come into direct contact with water. We do however, have our Trepanel Aqua® range which may be better suited to your needs. I have linked this below for you: https://www.wallsandfloors.co.uk/wall-panels/trepanel-aqua Kind regards, Walls and Floors
Good Afternoon Terri, Thank you for your query. Our Trepanel range features a wood veneer coating on all three sides so there's no need for a finishing strip on exposed edges. For the top of the panel, you can use a trim which would need to be the same width as the panel itself for a seamless finish. Many Thanks, Walls and Floors
Hi Mark We do not sell end panels I am afraid. The MDF is fully veneered on all three sides so there should be no exposed edge, If you would like the pane to end mid-wall then you can cut the excess felt off to it ends with a wood last as opposed to felt. Kind Regards Walls and Floors
Questions & Answers
Questions & Answers
Q & A
Hi David, The wood panels are not fire-rated. Kind Regards Walls and Floors
Hi John, Our panels are very easy to cut yourself. For the slats, we recommend a regular hand saw and for the felt, a sharp stanley knife. Please find our 'How to Install Wood Slat Wall Panels' video and Trepanel Guide linked below: https://www.youtube.com/watch?v=oVsyofQ3Vw4 https://m2.wallsandfloors.co.uk/media/amasty/amfile/attach/DesignDataSheet_Updated_3_.pdf We would not however, recommend installing our panels near a heat-source as this may interfere with the veneer and adhesive used. Kind regards, Walls and Floors
Hi Kyle, We would not recommend installing panels in areas with high levels of moisture or where they may come into direct contact with water. We do however, have our Trepanel Aqua® range which may be better suited to your needs. I have linked this below for you: https://www.wallsandfloors.co.uk/wall-panels/trepanel-aqua Kind regards, Walls and Floors
Good Afternoon Terri, Thank you for your query. Our Trepanel range features a wood veneer coating on all three sides so there's no need for a finishing strip on exposed edges. For the top of the panel, you can use a trim which would need to be the same width as the panel itself for a seamless finish. Many Thanks, Walls and Floors
Hi Mark We do not sell end panels I am afraid. The MDF is fully veneered on all three sides so there should be no exposed edge, If you would like the pane to end mid-wall then you can cut the excess felt off to it ends with a wood last as opposed to felt. Kind Regards Walls and Floors