Trepanel Bright® is here! The Trepanel Bright® LED lights are designed to effortlessly slot between the slats of our Trepanel® wood panels, adding a sleek, ambient glow to any Trepanel® design. These lights highlight the natural beauty of our wall panel slats, creating an inviting atmosphere with a modern edge. Simple to install and control, Trepanel Bright® is perfect for transforming your walls into eye-catching features. Here’s how to install Wood Slat LED lights for a sophisiticated lighting solution for your home.
In your box, you will receive:
- Roll of 2.4m lights
- Driver
- Power cord
For customisable control, you will also need:
Please note: These are sold separately from the lights.
How to Install Trepanel Bright®:
1 – Establish Power Supply
Choose where you would like your lights to be plugged in. Ensure the power to this source is completely turned off and disconnected to avoid the risk of electric shocks.
2 – Cut your Lights to Size
If you want to cut your lights to size to suit your style, you will find cut lines that are marked along the silicone casing.
Peel the tape off the back, and cut the end that is not connected to the wire. Anything that is cut off the end will be wasted.
Use a pair of scissors to cut through the entire strip light.
3 – Slot your Lights into Place
Peel off the top layer of the sticky 3M tape on the back of your LED lights.
Press the lights, sticky side to felt backing, into the gap between the slats on your Trepanel® Wall Panels.
4 – Connecting the Lights to the Driver
Connect the LED lights by plugging the wire into one of the correlating ports on the power driver provided.
Make sure the clips are secure in the driver.
5 – Powering the Lights
Connect the power cord to the driver in the correlating port, and plug the BS plug into your power source.
Switch on and off at the plug point, or connect the driver to either our wired switch or remote control (sold separately).
5.1 – Connecting the Wired Switch
To connect the wired switch to your lights, simply plug the switch into your driver in the correlating port. This switch comes with a casing that can be mounted to the wall, to ensure a tidy setup.
This switch is a simple button, that when pressed will turn your lights on and off. When you touch and hold the button (without pressing it), it will dim your LED lights.
6 – Enjoy!
Sit back, relax, and enjoy the cosy ambience of our Trepanel Bright®!
There you have our guide on how to install Wood Slat LED Lights! Be sure to tag us in pictures of your setup over on Instagram, @Wallsandfloors, we love seeing your creations.
